1 channel LGX Module Duplex CWDM OADM
1 channel LGX Module Duplex CWDM OADM
FM SKU#:SKU01572R
Model#:1DWE-LGX-FMCADM
products:http://www.fiber-mart.com/1-channel-lgx-module-duplex-cwdm-oadm-eastandwest-p-69.html
Model#:1DWE-LGX-FMCADM
products:http://www.fiber-mart.com/1-channel-lgx-module-duplex-cwdm-oadm-eastandwest-p-69.html
Duplex CWDM OADM for East-and-West Traffic
The Duplex CWDM/AD modules add (multiplex) and drop (demultiplex) selected wavelengths over dual fiber Duplex CWDM MUX & DEMUX link for East-and-West Traffic.
Fiber-Mart CWDM OADM ( CWDM/AD) modules are Course Wave Division Multiplexing (CWDM) Optical Add and Drop Multiplexers (OADM). “Add” and “drop” here refer to the capability of the device to add one or more new wavelength channels to an existing multi-wavelength WDM signal, and to drop (remove) one or more channels, passing those signals to another network path.
The CWDM/AD is a passive optical add/drop multiplexer designed for point-to-point, ring, or bus configurations’ applications that provides the ideal solution for the increasing bandwidth demand on enterprise and metro access networks and delivers dramatic cost savings to network equipment manufacturers, enabling them to develop metro access systems that are lower in cost, easier to provision and simpler to operate.
Added/dropped channels are interfaced to any of Fiber-Mart CWDM transceivers on the equipment side, and we also provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice.
The CWDM/AD is a passive optical add/drop multiplexer designed for point-to-point, ring, or bus configurations’ applications that provides the ideal solution for the increasing bandwidth demand on enterprise and metro access networks and delivers dramatic cost savings to network equipment manufacturers, enabling them to develop metro access systems that are lower in cost, easier to provision and simpler to operate.
Added/dropped channels are interfaced to any of Fiber-Mart CWDM transceivers on the equipment side, and we also provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice.
- a
- Common port:
- Trunk input and output in both west and east traffic.
- LC, SC, ST and FC connectors available.
- b
- Add/Drop port on west:
- Add and Drop on west.
- LC, SC, ST and FC connectors available .
- Compliant to ITU-T G.657A1 CWDM standard from 1270nm to 1610nm, with 20nm increase
- c
- Add/Drop port on east:
- Add and Drop on east.
- LC, SC, ST and FC connectors available.
- Compliant to ITU-T G.657A1 CWDM standard from 1270nm to 1610nm, with 20nm increase
NOTE:
About the Author