10MW 1310nm DFB butterfly laser module

By Fiber-mart IN MPO cable

FM SKU#:SKU00190F2
Model#:DFB-31-10-FM
MFG PART#:

10MW 1310nm DFB butterfly laser module

DFB butterfly laser module is specialized for adopting the high-quality MQW-DFB chip to meet the requirement of a high-speed, specific-wavelength light transmission system. It can be used for continuous-wave and pulsed applications such as sensing, frequency doubling, light detection and ranging, and injection seeding for fiber amplifiers or lasers.

Fiber-Mart 10MW 1310nm DFB butterfly laser module produces laser beams with a particular wavelength. It is able to deliver output power of 10MW. The 14-pin butterfly laser module will be supplied with a built-in optical isolator, a monitor photodiode, a thermoelectric cooler, and FC/APC connector and is pigtailed with a polarization-maintaining fiber. The built-in thermoelectric cooler enables the laser device to run stably under various environmental conditions. This series of product has found wide applications in the LAN, WAN, MAN, CATV transmission system, and long distance DMDW transmission system. It also can be used in the stabilized light source, modulated light source, or other communication equipment such as the CATV transmitter.

Features

High linearity high power MQW DFB LD chip
Built-in Isolator, TEC, Thermistor and Monitor PD
Hermetically sealed 14 Pin Butterfly Package Module
Optimized for 2.5 Gb/s Modulation Rates
Emission wavelength 1310 nm
Output power 10MW
Single mode FC/APC connector or customized
Singlemode fiber pigtail
RoHs compliant

Application

Long reach analog transmission systems
CATV forward-path
1310nm broadcast and point-to-point applications

Pin Description

Package Outline:

Order Information

-X	31	X	X	X	X	X
Chip	Wavelength	Insolator	Bandwidth	Connector	Pigtail Length	Power Range
D:DFB	31：1310nm	S：Single	1:1.25Gb/s	1：FC/APC	5：0.5M	1:2~4mw
B：Dual	2：2.5Gb/s	2：FC/PC	1：1M
W：Without		3：SC/APC		2:5~7mw
		4：SC/PC		3:8~10mw
		5：LC/PC		4:11~13mw
		W：Without		5:14~16mw
				6:17~19mw
				7:20~22mw
				8:23~24mw

Absolute Maximum Ratings

Parameter	Symbol	Condition	Min.	Max.	Unit
Operating Case Temperature	Tc	I=Iop	-20	80	°C
Storage Temperature	Tstg	–	-40	85	°C
Laser Forward Current	If	–	–	150	mA
Laser Reverse Bias	Vr	–	–	2	V
Photodiode Reverse Bias	Vrpd	–	–	10	V
TEC Current	Itec	-20 °C < Tc <+65 °C,	-2	2	A
Top=25 °C If=100 mA
TEC Voltage	Vc		-2.5	2.5	V
ESD	–	ESD – HBM: R=1500	-500	500	V
ohm, C=100 pF
Lead Solder Temperature	–	–	–	260	°C
Lead Soldering Time	–	–	–	10	S
Fiber Bend Radius	–	–	30	–	mm
Fiber Yield Strength	–	–	–	1	kgf

Optical & Electrical Characteristics

Parameter	Symbol	Test Conditions	Min.	Typ.	Max.	Unit
Center Wavelength	λc	CW	1300	1310	1320	nm
Spectral Width (-20 dB)	Δλ	CW	–	0.2	0.5	nm
Optical Output Power*	Po	CW, TL=25 °C	–	–	24	mW
Optical Isolation	IS	T=25 °C	30	35	–	dB
Side-mode Suppression Ratio	SMSR	CW	35	–	–	dB
Threshold Current	Ith	TL=25 °C	–	10	15	mA
Operating Current	Iop	CW	–	–	120	mA
Forward Voltage	VF	CW	–	1.2	2	V
Monitor Current	Imon	Vrpd=5 V	100	–	1500	μA
Monitor Dark Current	ID	Vrpd=5 V	–	–	500	nA
Operating Case Temperature	T	–	-20	–	60	°C
Tracking Error	γ	TE=10log(Po(Tc)/Po(25°C)	-1	–	1	dB
Thermistor Resistance	Rt	T=25 °C	9.5	–	10.5	KΩ
TEC Current	IC	ΔΤ=40°C	–	–	1	A
TEC Voltage	VC	ΔΤ=40°C	–	–	2	V
Frequency Range	F	–	45	–	2500	MHz
Cut-off Frequency	Fc(-3dB)	If=Iop	4	–	–	GHz
RIN	Nr	CW, If=Iop, f=2.5GHz	–	-155	-150	dB/Hz
Carrier Noise Ratio	CNR	Note 1	51	–	–	dB
Composite Second Order	CSO	–	–	-57	dBc
Composite Triple Beat	CTB	–	–	-65	dBc

Note1:

If=Iop, Optical Modulation, Index=3.2%/channel (minimum),60 PAL-D unmodulated carries (47 to 550MHz), 10km singlemode fiber, -1dBm received power, Receiver responsivity=0.85A/W.
If=Iop, Optical Modulation Index=3.2%/channel (minimum), CNR, CSO, CTB tested value at worst case over all test frequencies. NTSC 120ch., 10km singlemode fiber, -1dBm received power, Receiverresponsivity=0.85A/W

Updated on : Thursday 21st of November 2024

10MW 1310nm DFB butterfly laser module