Weldable FBG Strain Gauge Sensor


Model#:FM-FBG-W
MFG PART#:

The strain sensors make use of the sensitivity of fiber grating to measure the strain. The FBG is fixed inside a stainless steel housing between two anchoring points. The housing consists of a sliding mechanism that allows both ends to move freely relative to each other.

Key Features

  • Excellent repeatability and reliability
  • Excellent waterproof performance
  • Try harsh environments
  • Application

  • The strain sensors used in civil engineering construc-tion monitoring and long-term health monitoring, such as: bridges, interchanges, high-rise buildings, large steel construction.
  • Specification

    Parameter
    Unit
    Minimum value
    Typical value
    Maximum value
    Remark
    Center Wavelength
    nm
    1510
    /
    1590
    Customized
    -3dB bandwidth
    nm
    /
    0.25
    /
    Customized
    Accuracy
    1‰
    Strain Measurement Range
    με
    -1500
    /
    1500
    Temperature Range
    -40
    /
    80
    Insertion loss(IL)
    dB
    /
    0.5*
    /
    Dimension
    mm
    φ12 * 102
    weldable FBG
    78(L) * 14(W) * 7(H)
    Surface Mounted FBG Strain Gauge
    φ33 * 110
    Embedded FBG Strain Gauge
    Pigtail Type
    mm
    Amoured Or Jumper Cable
    Connector
    FC/APC
    Option: with temperature compensation
    (i.e. built-in 2 fbg inside, one for strain measurement, another for temperature compensation)

    Suggested Similar Articles

    About the Author

    Leave a Reply

    Your email address will not be published. Required fields are marked *