Comparison Of Different Optical Amplifiers

by www.fiber-mart.com

Optical amplifier is an important technology for optical communication networks. Without the need to first convert it to an electrical signal, the optical amplifiers are now used instead of repeaters. As we know, there are several types of optical amplifiers. Among them, the main amplifier technologies are Doped fiber amplifier (eg. EDFA), Semiconductor optical amplifier (SOA) and Fiber Raman amplifier. Today, we are going to study and compare them in this paper.

 

Before the comparison of the different optical amplifiers, let’s take a closer look at fiber optic amplifer. In general, a repeater includes a receiver and transmitter combined in one package. The receiver converts the incoming optical energy into electrical energy. The electrical output of the receiver drives the electrical input of the transmitter. The optical output of the transmitter represents an amplified version of the optical input signal plus noise. Repeaters do not work for fiber-optic networks, where many transmitters send signals to many receivers at different bit rates and in different formats. However, unlike a repeater, an optical amplifier amplify optical signal directly without electric and electric optical transformation. In addition, an ideal optical amplifier could support multi-channel operation over as wide as possible a wavelength band, provide flat gain over a large dynamic gain range, have a high saturated output power, low noise, and effective transient suppression. Several benefits of optical amplifiers as the following:

 

Support any bit rate and signal format

Support the entire region of wavelengths

Increase the capacity of fiber-optic links by using WDM

Provide the capability of all-optical networks, not just point-to-point links

OK, after a brief introduction of the optical amplifiers, we formally begin today’s main topic. As we talk above, there are three main types of today’s amplifier technology. Each of them has their own working principle, features and applications. We will describe them one by one in the following paragraphs.

 

Doped fiber amplifier (The typical representative: EDFA)

Erbium-doped fiber amplifier (EDFA) is the most widely used fiber-optic amplifiers, mainly made of Erbium-doped fiber (EDF), pump light source, optical couplers, optical isolators, optical filters and other components. Among them, a trace impurity in the form of a trivalent erbium ion is inserted into the optical fiber’s silica core to alter its optical properties and permit signal amplification.

 

Advantages & Disadvantages of EDFA

Advantages

 

EDFA has high pump power utilization (>50%)

Directly and simultaneously amplify a wide wavelength band (>80nm) in the 1550nm region, with a relatively flat gain

Flatness can be improved by gain-flattening optical filters

Gain in excess of 50 dB

Low noise figure suitable for long haul applications

Disadvantages

 

Size of EDFA is not small

It can not be integrated with other semiconductor deviecs

Semiconductor optical amplifier (SOA)

Semiconductor optical amplifier is one type of optical amplifier which use a semiconductor to provide the gain medium. They have a similar structure to Fabry–Perot laser diodes but with anti-reflection design elements at the end faces. Unlike other optical amplifiers SOAs are pumped electronically (i.e. directly via an applied current), and a separate pump laser is not required.