Fiber Optic Connector Types for data center

LC and MPO Fiber Optic connectors were defined for data center applications in accordance with ISO/IEC 24764, EN 50173-5 and TIA-942 standards for fiber optic cabling systems.

 

MPO Connector (IEC 61754-7)

MPO (multipath push-on) is based on a plastic ferrule that provides the ability to house up to 24 fibers in a single connector. Connectors with up to 72 fibers are already in development by this time. This connector stands out because of its compact design and easy operation, but brings disadvantages in optical performance and reliability.

 

This connector type is of crucial importance because of its increased packing density and ability to migrate to 40/100 Gigabit Ethernet.optical-fiber-mpo-connector_400

LC Connector (IEC 61754-20)

This connector is part of a new generation of compact connectors. It was developed by Lucent (LC stands for Lucent Connector). Its design is based on a 1.25 mm-diameter ferrule. Its duplex adapter matches the size of an SC adapter. As a result, it can achieve extremely high packing densities, which makes the connector attractive for use in data centers.connector_lc

 

SC Connector (IEC 61751-4)

SC stands for square connector or subscriber connector. It makes high packing densities possible because of its compact design, and can be combined into duplex and multiple connections. Despite its age, the SC continues to gain in importance because of its outstanding properties. It has been the most important WAN connector worldwide up to today, usually as a duplex version, because of its good optical properties.connector_sc-pc-apc

 

E-2000™ Connector (LSH, IEC 61753-15)

This connector is a development by the company Diamond SA which specializes in LAN and CATV applications. It is produced by three licensed manufacturers in Switzerland, which has also led to its unequaled quality standard. The integrated protective flap provides protection from dust and scratches as well as laser beams. The connector can be locked using grids and levers which can be coded by color and also mechanically.

 

Related Posts

 

SC Connector Introduction – Fiber Connector Introduction

The SC connector (short for Subscriber Connector, square connector or Standard Connector) mianly used in Datacom and telecom; GPON; EPON; GBIC, It features a 2.5mm Zirconia Ceramic ferrule and a push/pull coupling mechanism for a fast and reliable connection. The SC connectors are available for single mode UPC with blue…

 

 

LC Connector Introduction – Fiber Connector Introduction

The LC connector (short for Lucent Connector, Little Connector, or Local Connector), It features a 1.25mm Zirconia ferrule in a small form factor (SFF) fibre optic connector housing with a snag free latch which gives an audible click upon engaging for reliable and high density connections. The LC connector complied…

 

 

Data Center Design for 40G/100G Network

 

MTP MPO Trunk cables

On-site termination of an MPO/MTP® connector with 12, 24 or even up to 72 fibers is obviously no longer possible. In other words, if you use MPO connectors you also have to use trunk cables (Figure 11) delivered already cut to length and terminated. This approach requires greater care in…

 

 

Evolution of MPO Connectors

The MPO was created to provide highly reliable connections in high density fiber applications, primarily in interoffice data network environments. The connector was revolutionary and performed as advertised in its early years, and helped advance optical connectorization in subsequent decades. The data communications industry uses MPO connectors to connect fiber…