Can I Use Cat5e Cable With Cat6 Patch Panel?

---

 

As a key component of copper cabling
system, copper patch panel is popular with people. And there are Cat5e patch
panels and Cat6 patch panels available on the market. It is not difficult to
understand that Cat5e patch panel is used with Cat5e patch cable, while Cat6
patch panel is used with Cat6 patch cable jointly. But can I use Cat5e
patch cable with Cat6 patch panel or Cat6 patch cable with Cat5e patch
panel? This article will tell you the answer.

 

Overview of Cat5e and Cat6 Patch panel

First, let’s have a brief overview of
Cat5e patch panel and Cat6 patch panel. Cat5e patch panel is compliant with
TIA/EIA 568 industry specifications and is used for high speed LAN
transmission. In addition, Cat5e patch panels are available in 6-port and
8-port module groupings, in 8, 12, 24, and 48-port sizes. The high density
panel design can be mounted to standard racks or cabinets, accommodate top,
bottom or side cable entry, and also save rack space. While Cat6 patch panel is
specially designed for 1G Ethernet applications. It also meets the TIA/EIA 568
industry specification and each patch panel terminates with standard 110
termination tools on the rear, which allows quick installations. Cat6 patch
panel on the market covers 12, 24, 48, and 96-port configurations.

 

Can I Use Cat5e Patch Cable With Cat6
Patch Panel?

In fact, there isn’t much difference
between these two types of patch panels. What matters is the difference of wire
gauge specified between Cat5e and Cat6 patch cables. It’s well known that both
Cat5e and Cat6 patch cable contain four twisted pairs of copper wires, but Cat6
patch cable is thicker than Cat5e. This is because there is a longitudinal
separator inside Cat6 patch cable which isolates each of the four pairs of
twisted wire from the others, reducing crosstalk and allowing for better
signal. And another reason is that Cat6 patch cable utilizes copper conductor
which has larger diameter than that of Cat5e patch cable. So you may ask, if I
use Cat5e patch cable with Cat6 patch panel, will it be too loose? Slightly
Yes, but electrically it will still make contact and work well.

 

Can I Use Cat6 Patch Cable With Cat5e
Patch Panel?

Sometimes you may also encounter the
situation where you want to use Cat6 pacth cable with Cat5e patch panel. The
content above has mentioned that Cat6 patch cable is thicker than Cat5e patch
cable. In spite of the size difference between them, the fact is that Cat6
patch cable is backward compatible with Cat5e patch cable. Therefore, you can
feel free to use Cat6 patch cable with Cat5e patch panel.

 

Note

When plugging Cat5e patch cable on a
Cat6 patch panel, the Cat5e patch cable is small enough that it is possible to
get what looks like a good connection. However, the contact is not actually
good or the plug is not in the right place. While plugging Cat6 patch cable on
a Cat5e patch panel, the larger wire may end up bending or even breaking the port.
Therefore, in both cases, it is necessary to install and test each connection
carefully to make system work fine.

 

Conclusion

In theory, doing like these is not
recommended. Using Cat5e patch cable with Cat5e patch panel or Cat6 patch cable
with Cat6 patch panel will get the best performance. fiber-mart.COM provides
both high-density Cat5e patch panels for Fast Ethernet applications and Cat6
patch panels for 1G/10G Ethernet applications, such as 24 port Cat5e patch
panel, 48 port Cat5e patch panel, 24 port Cat6 patch panel, 48 port Cat6 patch
panel, etc. In addition, Cat5e shielded patch panel, Cat5e unshielded patch
panel, Cat6 shielded patch panel and Cat6 unshielded patch panel are available.