Cisco 10GBASE SFP+ Fiber Modules


The Cisco® 10GBASE SFP+ modules is one kind of fiber transceiver who offers customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.
 
Main features of Cisco 10GBASE SFP+ modules include: it has the smallest 10G form factor ,hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch and optical inter operability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link. What;s more, it supports not only 10GBASE Ethernet and OTU2/OTU2e, “pay-as-you-populate” model, digital optical monitoring capability, but also the Cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.
 
Then, some introductions about different kinds of the Cisco 10GBASE SFP+ Modules.
 
>Cisco SFP-10G-SR
The Cisco SFP+ 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.
 
The SFP-10G-SR price is favorable in Fiberyes. The following products price are favorable in Fiberyes.
 
>Cisco SFP-10G-SR-X
The Cisco SFP-10G-SR-X is a 10GBASE-SR module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.
 
>Cisco SFP-10G-LR
The Cisco SFP+ 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
 
>Cisco SFP-10G-LR-X
The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
 
>Cisco SFP-10G-ER
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber (SMF, G.652).
 
>Cisco SFP-10G-ZR
The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard single-mode fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.
 
>Cisco SFP+ Twinax Copper Cables
Cisco SFP+ Copper Twinax direct-attach cables are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. Cisco offers passive Twinax cables in lengths of 1, 1.5, 2, 2.5, 3 and 5 meters, and active Twinax cables in lengths of 7 and 10 meters.
 
>Cisco SFP-10G-LRM
The Cisco SFP+ 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3 or OM4. The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard single-mode fiber (SMF, G.652).
 
>Cisco FET-10G
The Cisco FET-10G Fabric Extender Transceiver support link lengths up to 100m on laser-optimized OM3 or OM4 multimode fiber. It is supported on fabric links only from a Nexus 2000 to a Cisco parent switch. Note this product is not orderable individually.

Suggested Similar Articles

About the Author

Leave a Reply

Your email address will not be published. Required fields are marked *