How to Buy The Optical Transceiver Module On The Market
What you can choose from the market, several small plug an optical module and network. Receives both an optical signal which is transmitted to the optical transceiver module.
All optical transceiver module, it is necessary to create and along the lines of the multi-source. Make sure that the specialist modules are placed in close coordination. Searching for the trend can be seen when the optical transceiver module can be considered as a group of the speed of transfer rate. Each module of the plug is different from the support of 1 Gbps to 10 Gbps. You can check what you should do great work is to be supported modules, courses.
You can find a variety of actions optical modules with different speeds and range. Modules XENPAK, XFP modules, X2 modules, GBIC, SFP +, SFP, XFP and there is a BiDi plug. Here you will find more information about a few things. For example, a 10g XFP transceiver BiDi road is constructed series for bidirectional optical communication 10G serial data, such as the IEEE 802.3ae 10GBASE-BX as to a transmitter 1330 of 1270 nm, 1270 nm, and the receiver (1330). Transmitting transceiver is configured into two sections with a multi-quantum-well 1330 (1270) nm DFB laser, and assessment at the International Standard IEC 60825 based 1 laser safety compliant; Receiver with built-in limit to the optical head 1270 (equipped 1330) used nano-detector preamplifier (IDP).
GBIC module is an Ethernet network, for example, is also connected to the optical fiber network, and a function as a special work. GBIC GBIC means and the other plug in the connector and the fiber optic cable is used to connect the Ethernet port. If the GBIC is hot-plug provides the ability to mix different types of interfaces without turning. Optical power and wavelength of the working distance and the determined transmission rate, set the specific group in the GBIC module.
The new generation modules can be used as a GBIC transceiver. Stands for Small Form Factor Pluggable SFP modules are hot-pluggable optics. Hot-pluggable transceivers are usually easily change compared to base interface module at regular intervals. These factors such as Cisco SFP is only about half a small tendency for large optical GBIC module + this can .SFP 10 Gbps rates of significant charges modules ranging from about 4 + Gbps to 100 Mbps to send to send. This module will notice that the transfer of approximately 500 m to 120 + km.
It is known that most XENPAK optical transceiver module of the copper lines, including multi-mode fiber optic cable and the single-mode optical fiber cable has a variety of different line of work XENPAK module. 300 m at maximum working distance of multimode fiber of about 15 m after the copper line is typical behavior. Most of the individual module is the first product in accordance with the maximum spanning up to 80 km. Multisource a plug light teuraensibeoyi 10Gbps.
Search What kind of optical transceivers on the market, you should know that you pursue the highest standards in order to make the item. Depending on the fiber optic network experience, you can easily be bought in the market for fiber optic patch cord fiber media converter, like other technical things. In today’s technology, it is faster and better, it is further possible to determine the dependence of the optical module and the other all-optical fiber product.