Author Archive Fiber-mart

---

The types of Outdoor Fiber Optic Cables

by www.fiber-mart.com Fiber optic cable provides protection for the fibers from the environment encountered in an installation. Outdoor Fiber Cable is designed strong to protect the fibers to operate safely in complicated outdoor environment, it can be buried directly, pulled in conduit, strung aerially or even placed underwater. While indoor cables don’t [ Continue reading…]

---

What’s CWDM XFP Transceiver

by www.fiber-mart.com CWDM-XFP 10G-40 Transceiver 10G CWDM XFP is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are four center wavelengths available from 1270nm to 1330nm, with each step 20nm. Key Features The 10GB CWDM XFP 1270nm to 1330nm 40km optical transceiver Average [ Continue reading…]

---

---

Copper Ferrule Flange for LC Fiber Connector

FM SKU#:SKU20127YModel#:CO-FF-LC-FMMFG PART#: Specification: High performance and durabilityLow insertion lossLow back reflectionStandard and custom configuration12.7mm length Features: Good compatibilityAccurate mechanical dimensionsGood reliability and stabilityCompliant with RoHS, Bellcore, IEC Application: TelecommunicationCATVLAN (including FTTx)Data networkFiber stubfiber optic connectorsSinglemode and multimode

---

MPO to MPO Simplex Plastic Fiber Adapter

FM SKU#:SKU50261JModel#:AD-MPO-MPO-SX-FMMFG PART#: MPO to MPO Singlemode/Multimode Simplex Plastic Fiber Adapter Fiber optic adapters are used to provide a cable to cable or cable to equipment fiber optic connection. We supply a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adaptor. Key [ Continue reading…]

---

Brief introduction of OTDR

by www.fiber-mart.com OTDR is connected to one end of any fiber optic system up to 250km in length. Within a few seconds, we are able to measure the overall loss, or the loss of any part of a system, the overall length of the fiber and the distance between any points [ Continue reading…]

---

---

The Solution of Fiber Optic Attenuator

by www.fiber-mart.com Fiber optic attenuator is a device to reduce the power level of an optical signal, either in free space or in an optical fiber. Things You Should Know About Fiber Optic Attenuators Why Fiber Optic Attenuators Are Needed? Most people believe bigger signal power level is better, right? [ Continue reading…]

---

The best way to Install CWDM MUX/DEMUX System?

by www.fiber-mart.com Coarse wavelength division multiplexing (CWDM) technology is developed to expand the capacity of a fiber optic network without requiring additional fiber. In a CWDM system, CWDM Mux/Demux (multiplexer/demultiplexer) is the most important component. Usually, a CWDM Mux/Demux is used to increase the current fiber cable capacity by transmitting multiple wavelengths, [ Continue reading…]

---

Customized 1xN/2xN Opto-Mechanical Optical Switches Benchtop

Opto-Mechanical Optical Switches Benchtop Rackmount Benchtop Rackmount with no preinstalled optical switch modules. It is designed for 1xN (N≤32) opto-mechanical optical switch modules. Modules can be easily installed into the chassis. The dimension of this Benchtop rackmount chassis is 290X260X110mm.The rear panel bulkheads can be fit with typical FC/UPC, FC/APC, [ Continue reading…]

---

48-Port Gigabit PoE+ Managed Switch with 4 SFP+, 600W

48-Port Gigabit PoE+ Managed Network Switch with 4 SFP+, 600W S1600-48T4S managed PoE+ Ethernet switch comes with 48×10/100/1000Base-T RJ45 Ethernet ports, 1x console port, 4x 10G SFP+ slots. It offers enterprise-class features, High-performance of both hardware and software , stable and reliable rapid spanning Tree Protocol (RSTP), free configuration, Strong [ Continue reading…]

---

Brief introduction of OTDR OLT optical module

by www.fiber-mart.com The fiber to the home (FTTH) is an important technology of the wired access broadband in 21 century. And PON represents one of the most widely deployment network architecture.   ShinewayTech S20A/E Palm OTDR 1310/1550nm, 28/26dB At present, the global telecom operators are trying their best to reduce [ Continue reading…]

---