Author Archive Fiber-mart


Single-mode Fiber is better than Multimode SFP Transceiver?

pending image

by www.fiber-mart.com Network installers usually come across a situation that device you have in your network does not always fit and work perfectly with the fiber. They plan to make a cable plant based on the multimode cabling, but owing to the link limitation or other reasons, they have to [ Continue reading…]


Materials of Fiber Optic Patch Cable

pending image

by www.fiber-mart.com fiber-mart.com supplies a complete line of multimode fiber optic patch cords with SC, FC, ST, LC, MU, MT-RJ, DIN, D4 and MPO terminations available in 62.5/125 (Standard) or 50/125 (Custom) multimode fiber types, Simplex and Duplex, used for short distance data transmission, we usually use MMF for multimode [ Continue reading…]



SDH SONET 10GBASE SFP+ 1310nm 220m Multi-Mode Transceiver

pending image

FM SKU#:SKU00412KModel#:SSFP-10G31-2MMFG PART#: SSFP-10G31-2M Fiber-Mart SDH SFP+ transceiver is a high performance, cost effective modulse for serial optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. The modules are designed for single mode fiber and operates at a nominal wavelength of 850/1310/1550 nm. The transmitter [ Continue reading…]


16GBASE Fibre Channel (16G FC) SFP+ 1310nm 10km Transceiver

pending image

MFG PART#: SFP-16G31-10 Fiber-Mart offers SFP+ 16G, SFP 16G fibre channel transceivers that are SFP compliant. This fibre channel transceiver solution supports high-speed serial links over multimode optical fiber at signaling rates up to 14.025 GB. Using the 2-wire serial interface defined in the SFF-8472 MSA, these 16G fibre channel [ Continue reading…]


Fiber Optic Polishing Machine

pending image

by www.fiber-mart.com Optical Fiber Polisher, OP-2000C is corner pressure polshing machine for fiber connectors.  Key Features: Can polish 24~40 connector at same time, very applicable to bulk productionPolish process using liquid crystal display, can display the time polish, polish speed and polish times, making the process easier to control quality Polish fixture [ Continue reading…]



How OTN used for High Speed Service

pending image

by www.fiber-mart.com Nowadays, the SONET/SDH network is an universal network that combines with WDM (wavelength division multiplexing) technique to transmit multiple optical signals over a single fiber. In future networking, high speed transmission is no doubt the migration trend. Inspired by the SONET/SDH network, ITU-T (ITU Telecommunication Standardization Sector) has [ Continue reading…]


Introduction of Some Common Fiber Optical Transceivers

pending image

by www.fiber-mart.com Fiber optic transceiver including both transmitter and receiver in a single module is an important equipment transmitting and receiving data to support the normal operation of optical fiber data transmission system. The market currently offers a wide selection of fiber optic transceiver for use with different types of wire, [ Continue reading…]


Customized Singlemode Fiber Optic OTDR Launch Cable Box

pending image

Fiber Optic OTDR Launch Cable Box An OTDR launch cable, which connects the OTDR to the link-under-test, discloses the insertion loss and reflectance of the near-end connection. It is often available on a small spool or within a “launch box”, which is used to create the proper conditions for testing [ Continue reading…]


FA-GO Fiber Array Endface Analyzer

pending image

FA-GO fiber array endface analyzer is the first type instrument to measure FA component in the world, which is developed by Sunma Technology Inc. FA-GO filled up the instrument blank of FA measurement, it has important meaning to raise endface quality of fiber array, also to improve packing efficiency, success rate [ Continue reading…]


what are differences of bare fiber,loose tube and tight buffer tube

pending image

by www.fiber-mart.com Bare fiber   From the fiber production process, which the composition of the fiber from the inside out: the core, cladding, a coating, and secondary coating. Optical signals in optical fibers are using light of the principle of total reflection. The glass fiber is the main channel of [ Continue reading…]