Author Archive Fiber-mart

---

How Does the Network Switch Work

 by www.fiber-mart.com Switching is a technology collectively referred to the requirements of transmitting information at both ends of the communication, using manual or equipment to automatically complete the information to be transmitted to the corresponding route that meets the requirements. A network switch in the broad sense is a device [ Continue reading…]

---

The Differences of PC, APC, UPC Interface Fiber Patchcords

 by www.fiber-mart.com The difference of End Grinding Angle PC is Physical Contact. PC is a microsphere grinding and polishing, the surface of the ferrule is ground into a slight spherical surface, and the fiber core is located at the highest point of bending. This can effectively reduce the air gap [ Continue reading…]

---

---

Do You Know How to Install a Fiber Optic Patch Panel?

 by www.fiber-mart.com Nowadays, fiber optic patch panel is becoming popular in optical fiber wiring systems, especially in high-density wiring environments such as data centers and server rooms. Fiber optic patch panel is convenient for people to access the optical fiber cables in the box, and can protect the optical fiber cables well. [ Continue reading…]

---

The Introduction of MPO/MTP Optic Fiber Patch Panel

 by www.fiber-mart.com With the rapid development of the network, the 40G network has now become so popular, and the 100G network is also widely used. Nowadays, the traditional fiber optical LC connection can no longer meet the high speed and high density requirements of the data center. In this case, [ Continue reading…]

---

What is DWDM Optical Transceiver Module?

 by www.fiber-mart.com DWDM (Dense Wavelength Division Multiplexing) is the so-called Dense Wavelength Division Multiplexing technology, which refers to a fiber optic data transmission technology, which uses the wavelength of the laser to transmit according to bits or string line transmission in the optical fiber. And DWDM optical transceiver module is [ Continue reading…]

---

---

How to use 24 Fibers MPO/MTP cable in 40G/100G Networks?

 by www.fiber-mart.com What is 24 fibers MTP/MPO Cabling? 24cores MTP/MPO cabling is a high-density wiring solution based on 24 core MTP/MPO cables. Compared with 24 fibers cabling that uses three 8 fibers MTP/MPO cables or two 12 fibers MTP/MPO cables, one 24 fibers MTP/MPO cable can provide higher density.   [ Continue reading…]

---

The Applications of SFP Optical Transceivers

 by www.fiber-mart.com Today’s data centers are no longer just one or a few computer rooms, but a group of data center clusters. In order to realize the normal operation of various Internet services and application markets, data centers are required to operate in coordination. The real-time mass exchange of information [ Continue reading…]

---

What is Pre-terminated MPO MTP Cables?

 by www.fiber-mart.com The MPO fiber patch cord adopts MPO (Multi-fiberPushOn) connector. The precise connection of the patch cord is realized through two guide holes and guide pins with a diameter of 0.7mm on the left and right of the end face of the ferrule. At present, the most widely used is the [ Continue reading…]

---

How to Realize the Precise Connection of Optical Fiber by Optical Fiber Adapter?

 by www.fiber-mart.com When two optical fibers are connected, due to the difference in position, shape and structure of the two optical fibers, the energy cannot be 100% from one optical fiber to the other. That is, there will be connection loss. In order to minimize connection loss, the two fibers [ Continue reading…]

---

The Latest Methods of Aerial Fiber Cable Construction

 by www.fiber-mart.com Many people are confused about the hanging of aerial optical cables. In fact, there are two methods for aerial optical cables laying: one is “fixed-pulley traction method”, including “manual traction method” and “mechanical traction method”; the other is “cable tray moving and releasing method”. Next, we will take [ Continue reading…]

---