MPO cable Archive

---

How to use the media converter?

Optical fiber media converter is also known as optical-to-electrical converter, its function as converting the optical and electrical signal. The transmission process is roughly: the electrical signals are converted into optical signals, transmitted through optical fibers, and then the optical signals are converted into electrical signals at the other end, [ Continue reading…]

---

The difference between AOC and DAC

In this article, fiber-mart.com will introduce to you, what is the difference between active optical cable(AOC) and direct attach cable(DAC)? First, the AOC is composed of integrated optoelectronic devices. The signal transmission process is that the A terminal module converts the electrical signal into an optical signal, the optical signal [ Continue reading…]

---

---

The way to choose DAC high-speed cable?

 DAC high-speed cable is a low-cost and short-distance connection solution for data center equipment. It consists of a cable and optical fiber transceiver devices at both ends of the cable. Because of the high cost performance, the interconnection application between short-distance network equipment is widely welcomed. At present, there are [ Continue reading…]

---

What are the key factors that affect the performance of DAC high-speed cables?

 The English translation of high-speed cable is Direct Attach Cable, or DAC for short. This article will introduce several key factors that affect the transmission performance of DAC high-speed cable. 1. Cable attenuation Cable attenuation refers to the reduction or loss of signal energy that occurs during the transmission of [ Continue reading…]

---

The advantages of OM5 optical fiber patch cord?

 1. Lower fiber loss OM5 is the name given to a new type of broadband multimode fiber, with attenuation reduced from 3.5 dB/km to 3.0 dB/km for previous OM3 and OM4 fibers, and additional bandwidth requirements at 953nm wavelengths. The geometry of OM5 (50μm core and 125μm cladding) is the [ Continue reading…]

---

---

the advantages of the 10G SFP+ CWDM optical transceiver?

 In this blog, fiber-mart.com will introduce what is 10G SFP+ CWDM optical transceiver, and what are its advantages. 10G SFP+ CWDM optical transceiver is a kind of coarse wavelength division multiplexing optical transceiver, usually used with single mode optical fiber. This kind of optical transceiver uses the CWDM technology to [ Continue reading…]

---

Three application scenarios of POE optical fiber media converter

 POE optical fiber media converter is one of the common equipment to build enterprise POE network architecture. It can use the existing unshielded twisted pair wiring to power the network equipment. In this article, ETU-LINK will introduce you the application scenarios of POE optical fiber media converter? Poe optical media [ Continue reading…]

---

Three application scenarios of POE optical fiber media converter

 POE optical fiber media converter is one of the common equipment to build enterprise POE network architecture. It can use the existing unshielded twisted pair wiring to power the network equipment. In this article, ETU-LINK will introduce you the application scenarios of POE optical fiber media converter? Poe optical media [ Continue reading…]

---

QSFP28 SR4 optical module connection solution and application field

 As a member of the new QSFP28 family, the 100G QSFP28 SR4 optical module is a very ideal solution in the short distance transmission of 100g network. The application of 100G will be more and more put into the actual environment. So what is the connection solution of 100G QSFP28 [ Continue reading…]

---

Optical Switch and Their Working

 Need of optical fiber amplifiers  An optical amplifier solves the traditional distance problem as in anylong-distance telecommunication system such as a trans-Atlantic link. Due to optical signals traveling through the fiber, the signals become weaker in power. The farther you go, the signals become weaker till it gets too weak [ Continue reading…]

---