MPO cable Archive

---

An Easy Guide to MPO/MTP Polarity

Nowadays, many data centers are migrating into the 40G and 100G transmission. To prepare for this change, MPO/MTP technology is applied to meet the requirements of high density patching. Typically, a fiber optic link needs two fibers for full duplex communications. Thus the equipment on the link should be connected properly at [ Continue reading…]

---

Three Media Options for 10GbE in Data Centers

With the added network infrastructure complexity, power demands, and cost considerations, 10 Gigabit Ethernet (GbE) comes to network administrators’ thinking point. While 1GbE connection is able to handle the bandwidth requirements of a single traffic type, 10GbE has been preferred as the ideal solution by customers to meet current and [ Continue reading…]

---

---

LC Connector Introduction

Fiber optic connectors are used to the mechanical and optical means for cross connecting fibers. Fiber optic connectors can also be used to join fiber cables to transmitters or receivers. There have been many types of connectors developed for fiber cable. Single mode networks have used FC or SC connectors in about the [ Continue reading…]

---

Recommendations for High-speed Fiber Optic cable

Recent years, with the developments of 10g transceiver modules, there is a low cost technical solution in the short distance high speed internet connections, it is gigabit high speed cable. These direct attach cables also known as twinax cable, they are different from other common fiber optic cable, whether in the [ Continue reading…]

---

Why choose fiber optic cleaning products?

All the clean freaks out there, we know what goes through your head when something does not seem clean even when you wipe it spotless. Little fragments of dust seem to be present throughout. In fact dust, dirt, oil and other particles can block signals of your fiber optic network [ Continue reading…]

---

---

QSFP+ to 4xSFP+ AOC and QSFP+ MTP Breakout Cable Solution

Migration from 10G to 40G is an inevitable trend in data center. Migration means you need new QSFP+ transceiver modules, fiber patch cables and other equipment. Common two methods to migrate from 10G to 40G for short distance are QSFP+ to 4xSFP+ AOC and QSFP+ MTP breakout cable solution. When [ Continue reading…]

---

OM4 vs. OM5: What’s the Difference?

As the demand for bandwidth, new transmission media must be developed to meet the requirements of users. The latest in optical transmission media is called OM5 fiber. To help you use this advanced fiber to its greatest advantage, this paper describes the basis of OM5 fiber, and highlights the key differences [ Continue reading…]

---

Five Basics About Fiber Optic Cable

A fiber optic cable is a network cable that contains strands of glass fibers inside an insulated casing. They’re designed for high performance data networking and telecommunications. Fiber optic cable carry communication signals using pulses of light, faster than copper cabling which uses electricity. They are becoming the most significant [ Continue reading…]

---

Optical divider and connector market strong demand

In many related policies, driven by large-scale light in to the copper retreat has unfolded, with FTTx substantive, ODN products becoming an important part of FTTx system, may also be the expansion opportunity. In line with the statistics, the proportion of ODN access equipment investment taken into account 50% ~ 60% [ Continue reading…]

---

The principle of optical fiber connector and classification

In optical fiber communication (transmission) link, in order to achieve the different modules.The needs of the flexible connection between devices and systems, there must be a able to removable between optical fiber and optical fiber (activities) of the connection device, can make the light path according to the required transmission [ Continue reading…]

---