MPO cable Archive

---

XFP transceiver perform better than standard

by www.fiber-mart.com Fiber optic cable manufacturers through the attenuation and bandwidth of the two parameters to illustrate the characteristics of the product. Although these parameters are the basis of good performance, but they still can not fully reflect the performance of cable.   Because these cables are mainly used for local [ Continue reading…]

---

Is the XFP transceiver not a modem?

by www.fiber-mart.com XFP transceivers and light cats are all photoelectric conversion products, many people are more easily confused. In fact, both from the working principle to the appearance of the existence of a big difference, it is easy to identify, the following Xiaobian for everyone to introduce the difference between the [ Continue reading…]

---

---

How to guarantee the transmission distance of the XFP module?

by www.fiber-mart.com With the increasingly fierce competition in the optical communication market, the price of the XFP module is irregular, such as Cisco, HUAWEI, H3C, Juniper, Brocade，Extreme etc. The price of these big brand module is very high, the market capacity of third party compatible module is increasing continuously.    Second-hand XFP [ Continue reading…]

---

The advantages of BiDi SFP+ transceiver

by www.fiber-mart.com With the rapid development of communication, the requirement for the wireless bandwidth is getting higher and higher on the market. New products are developed by manufacturers of optical communications like BiDi SFP+ transceiver. Today we are sharing the apply of BiDi SFP+ transceiver.   BIDI is belong single-fiber bidirectional [ Continue reading…]

---

How to Test a XFP Transceiver?

by www.fiber-mart.com After installing the XFP transceiver, testing its performance is an essential step. How to test it? You may get the answer on this article.   There are four steps in testing an XFP transceiver (As shown in the following picture), which mainly includes the transmitter testing and receiver testing. [ Continue reading…]

---

---

How to use optical patch cord correctly?

Both optical patch cord and optical transceiver have single mode / multimode. If the collocation is wrong when using, it will lead to the parameter error of the optical modules. How to match the use of patch cord and optical transceiver? Today, we will share the knowledge with you, hope that can [ Continue reading…]

---

What are the advantages of the 100G XFP module?

The 100G XFP transceiver adoption rate in optical landscape is consistently on the rise for the past few years. It is predicted that over half of the data center optical transceiver transmission will make the shift to 100G. The traditional 10G or even 40G may not be enough considering the explosion of [ Continue reading…]

---

CWDM modules’ applications

Recently, some of our customers want to know more about the CWDM modules’ applications. Here we share some of CWDM knowledge to you, hope these can be helpful for your business!   1. What is CWDM modules? With the CWDM optical transceiver, different wavelength can be transmitted by only one core. [ Continue reading…]

---

Do you know about PON optical transceiver

The PON optical transceiver is a high performance optical module for the PON system, also known as the PON module, conforms to the ITU-T G.984.2 standard and the MSA. It uses different wavelengths to send and receive signals between the OLT (optical line terminal) and the ONT (optical network terminal).   Classification [ Continue reading…]

---

The importance of switches in optical module testing

With the increasingly fierce competition in the optical communication market, the price of the optical module is irregular, such as Cisco, HUAWEI, H3C, Juniper, ZTE, Extreme etc. The price of these big brand module is very high, the market capacity of third party compatible module is increasing continuously.    Used optical [ Continue reading…]

---