MPO cable Archive

---

Media Converters Provide Cost-effective Soluton

Network complexity, demanding applications, and also the growing number of devices around the network are driving network speeds and bandwidth requirements higher and forcing longer distance requirements within the LANs. However, Media Converters provide solutions to these complaints, utilizing the optical fiber if it is needed, and integrating new equipment [ Continue reading…]

---

CWDM System Testing Process

With the explosion of CWDM, it is very necessary to formulate a basic testing procedure to certifying and troubleshooting CWDM networks during installation and maintenance. Today, one of the most commonly available test methods is the use of an OTDR or power source and meter, which is capable of testing [ Continue reading…]

---

---

How to Terminate Fiber Optic Cables?

Since the late 1970s, various connectors and termination methods have been brought to market. Now in the common case, cables are terminated in two ways: use connectors to make two fibers jointed or to connect the fiber to other network gears; use splices to make a permanent joint between two [ Continue reading…]

---

Fiber Optic Visual Light Testers

Visual fault locators can be part of OTDR, which is able to locate the breakpoint, bending or cracking of the fiber glass. It can also locate the fault of OTDR dead zone and make fiber identification from one end to the other end. Fiber optic visual fault locators include the pen type, [ Continue reading…]

---

Photonic Integrated And High-speed Optical Interconnection Technology

Currently, in the field of active optical devices, high-speed optical communication (40G/100G), broadband access FTTH, 3G and LTE wireless communication, high-speed optical interconnection, chips applied in intelligent Fiber Optic Network, device and module technologies are competing to become the hot spots of development. And the photonic integrated, high-speed optical signal modulation [ Continue reading…]

---

---

Understanding Fiber Optic Based Light Source

Each piece of active electronics will have a variety of light sources used to transmit over the various types of fiber. The distance and bandwidth will vary with light source and quality of fiber. In most networks, fiber is used for uplink/backbone operations and connecting various buildings together on a [ Continue reading…]

---

The Importance of Reliable Date Cabling

It is hard to imagine a world without the internet as it is so important in the modern business environment. We cannot stress enough the importance of reliable networking cabling. Some recent studies vindicated our evangelical approach to data cabling:   Data cabling typically account for less than 10 percent of [ Continue reading…]

---

CWDM Solutions Offered by fiber-mart.com

As broadband has unveiled a new world for subscriber, full of advanced capabilities and faster speeds. Your challenge is to meet their demands without compromising your budget. Because of its distance, speed and bandwidth potential, fiber optics has become the choice for many service providers. Fiber optic connections typically requires [ Continue reading…]

---

What Is 40G QSFP+ AOC and it’s application

40G AOC, is a type of active optical cable for 40GbE applications that is terminated with 40GBASE-QSFP+ on one end, while on the other end, in addition to QSFP+ connector, it can be terminated with SFP+ connector, LC, SC, FC, and ST connector etc. The 40G QSFP+ AOC is a [ Continue reading…]

---

Typical CWDM Optical Elements and Features

CWDM VS DWDM differ noticeably in the spacing between adjacent wavelengths. DWDM packs many channels into a small usable spectrum, spacing them 1 to 2 nm apart; DWDM systems support a high channel count, but also require expensive cooling equipment and independent lasers and modulators to ensure that adjacent channels [ Continue reading…]

---