by www.fiber-mart.com What is Fiber Optical Transponder? As we know, transponder is important in optical fiber communications, it is the element that sends and receives the optical signal from a fiber. A transponder is typically characterized by its data and the maximum distance the signal can travel. Functions of [ Continue reading…]
FM SKU#:SKU00001I2Model#:CWDM-SFP1G-60MFG PART#: CWDM-SFP1G-60 The CWDM-SFP1G-60 series single mode transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability.This module is designed for single mode [ Continue reading…]
CWDM-SFP1G-120 The CWDM-SFP1G-120 series single mode transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability.This module is designed for single mode fiber and operates [ Continue reading…]
y www.fiber-mart.com The Cisco SFP transceivers are designed to change the serial electric signals to the serial optical signals which mainly maintain gigabit Ethernet, includes fiber channel and SONET/SDH, it provides a beneficial way, adopt the method of resolution in the university campus, data center, metropolitan areas, ring networks and store web [ Continue reading…]
by www.fiber-mart.com Recently I met a trouble that when I want interconnect WS c2960 24 TC L + 2 SFP with 1000base LH GLC LH SMD or GLC LH SM to WS C3750G 12S + 12 SFP ports, and I do not know which model of GLC LH SMD or [ Continue reading…]
by www.fiber-mart.com The main elements defined in the SFP/SFP+ MSA is listed as follows: Mechanical Interface Mechanical dimensions of the device (H: 8.5mm, W: 13.4mm, D: 56.5mm) Transceiver edge connector to host PCB-mounted electrical connector mating Host board mechanical layout (location/size of solder pads, etc.) Insertion, Extraction and [ Continue reading…]
by www.fiber-mart.com Nowadays, with the further popularization of the optical fiber communication, fiber optic splitter plays an increasing significant role in many of today’s optical network topologies. Although there are variations of splitter types, the two most commonly deployed splitters are FBT (Fused Biconical Taper) splitter and PLC (Planar Lightwave [ Continue reading…]
by www.fiber-mart.com Created by the Full Service Access Network (fiber-mart.com) working group, the Passive Optical Network (PON) is a group of technologies that put Fiber to the Home (FTTH) into reality. It consists of a central office node optical line terminal (OLT) at the service provider’s office and a number [ Continue reading…]
by www.fiber-mart.com In FTTx and PON architectures, fiber optic splitter is an important component to share the optic network with multiple users. The basic principle of fiber optic splitter is to split one optic light beam into several parts at a certain ratio. According to different manufacture technologies, fiber optic [ Continue reading…]
FM SKU#:SKU50163JModel#:CO-MM-DX-LC-3MFG PART#: LC UPC Multimode Duplex 3.0mm Boot Size Fiber Optic Connector Fiber-Mart Co., Limited supply various kinds of Single Mode and Multimode fiber optic connectors for ST, SC, FC, LC, and MTRJ applications. Each fiber optic connector is functionally tested before shipping and is covered by a lifetime [ Continue reading…]
All Right Reserved by Fiber-mart.com 2023