Fiber Optic Polishing Machine
No Commentsby www.fiber-mart.com Optical Fiber Polisher, OP-2000C is corner pressure polshing machine for fiber connectors. Key Features: Can polish 24~40 connector at same time, very applicable to bulk productionPolish process using liquid crystal display, can display the time polish, polish speed and polish times, making the process easier to control quality Polish fixture [ Continue reading…]
How OTN used for High Speed Service
No Commentsby www.fiber-mart.com Nowadays, the SONET/SDH network is an universal network that combines with WDM (wavelength division multiplexing) technique to transmit multiple optical signals over a single fiber. In future networking, high speed transmission is no doubt the migration trend. Inspired by the SONET/SDH network, ITU-T (ITU Telecommunication Standardization Sector) has [ Continue reading…]
Introduction of Some Common Fiber Optical Transceivers
No Commentsby www.fiber-mart.com Fiber optic transceiver including both transmitter and receiver in a single module is an important equipment transmitting and receiving data to support the normal operation of optical fiber data transmission system. The market currently offers a wide selection of fiber optic transceiver for use with different types of wire, [ Continue reading…]
Customized Singlemode Fiber Optic OTDR Launch Cable Box
No CommentsFiber Optic OTDR Launch Cable Box An OTDR launch cable, which connects the OTDR to the link-under-test, discloses the insertion loss and reflectance of the near-end connection. It is often available on a small spool or within a “launch box”, which is used to create the proper conditions for testing [ Continue reading…]
FA-GO Fiber Array Endface Analyzer
No CommentsFA-GO fiber array endface analyzer is the first type instrument to measure FA component in the world, which is developed by Sunma Technology Inc. FA-GO filled up the instrument blank of FA measurement, it has important meaning to raise endface quality of fiber array, also to improve packing efficiency, success rate [ Continue reading…]
what are differences of bare fiber,loose tube and tight buffer tube
No Commentsby www.fiber-mart.com Bare fiber From the fiber production process, which the composition of the fiber from the inside out: the core, cladding, a coating, and secondary coating. Optical signals in optical fibers are using light of the principle of total reflection. The glass fiber is the main channel of [ Continue reading…]
How Fiber-Optic Internet Works
No Commentsby www.fiber-mart.com You’ve probably heard of fiber-optic Internet. You might even know that it delivers incredibly fast Internet to more than 10 million homes using a fiber-to-the-home connection (FTTH). But do you know what makes fiber Internet different? The secret? Fiber-optic technology. Fiber-optic Internet uses different equipment and technology [ Continue reading…]
Advantages of Using Patch cord
No Commentsby www.fiber-mart.com Patch cord is an electrical or optical cable, which is used to connect one electronic or optical device to another for signal routing. Patch cords are the most niversal form of Ethernet cable available today. Patch cords are also used to route signals to mixing boards, processors, conditioners, [ Continue reading…]
2km/40km 850nm/1310nm SFP 100M E SingleMode to Multimode Fiber Media Converter
No CommentsFM SKU#:SKUC0317VModel#:FM-MM/SM-G012MFG PART#: FM-MM/SM-G012 Ethernet Single Mode to Multimode Fiber Stand-Alone Media Converters are ideal for campus area networks or other applications requiring the distance advantages of single mode fiber. Extend a Ethernet backbone connection up to 125 km for MAN (metropolitan area network) applications. Convert 100BASE-SX ports on a [ Continue reading…]
N8000-32Q (32*40Gb) 40Gb SDN Switch L2/L3 ICOS
No CommentsN8000-32Q (32*40GbE) 40GbE Open Networking Switch Preloaded Broadcom ICOS The Fiber-MART.COM N8000-32Q is a 32 ports 40GbE switch in a compact 1U form factor, ideally suited for data center environments in either Top-of-Rack (TOR) or Spine deployments. The N8000-32Q provides 32 QSFP+ ports, and each port can be configured as [ Continue reading…]