Fiber Optic Connectors ― an Essential Part of Fiber Patch Cords
No Commentsby www.fiber-mart.com Fiber optic patch cord is a fiber optic cable capped at both ends with fiber optic connectors to allow it to be rapidly and conveniently connected to telecommunication equipment and to achieve accurate and precise connections. Fiber optic connector is a very important part of the fiber patch cords. [ Continue reading…]
More about Multimode Fiber Optic Patch Cable
No Commentsby www.fiber-mart.com We know that fiber optic patch cables play a very important role in the connection between devices and equipment. When talking about fiber optic patch cables, we usually divide them into multimode fiber optic patch cables and singlemode fiber optic patch cables according to the modes of the [ Continue reading…]
622Mbps 1550nmTX/1490nmRX BiDi SFP 80km Transceiver
No CommentsMFG PART#: BSFP-6M54-80 The SFP BIDI transceivers are high performance multi-rate module for OC-12/STM-4 fiber communications by using 1550nm/1490nm transmitter and 1490nm/1550nm receiver. It is with the SFP 20-pin connector to allow hot plug capability. The transmitter section uses a multiple quantum well A type/B type laser and is a [ Continue reading…]
100GBASE-SR10 CXP 850nm 150m Transceiver for MMF
No CommentsMFG PART#: CXP-100G85-1M 100GBASE-SR10 CXP form factor transceiver module for multi mode fiber, short wavelength over 10 lanes, in the 850nm wavelength window, MPO/MTP connector with up to 100m on OM3 and 150m on OM4 reach per IEEE 802.3ba requirements. 100GBASE-SR10 CXP transceiver modules are designed for use in up [ Continue reading…]
Guide to Fiber Optic Patch Cord Management
No Commentsby www.fiber-mart.com Though fiber optic patch cord is a preferable option in a network, it also has the potential to be the weakest link in fiber network infrastructures. So it is very essential to follow correct procedures in administration of fiber patch cords to achieve optimum performance and reliability. Best practice in [ Continue reading…]
Introduction of SFP Bidi Transceiver
No Commentsby www.fiber-mart.com In communication networks, many transmission lines need bidirectional transmission. This need leads to the development of Bidirectional (BiDi) transceivers, which can transmit and receive data to/from interconnected equipment through a single optical fiber. BiDi transceivers are fitted with wavelength division multiplexing (WDM) diplexers, which combine and separate data [ Continue reading…]
Whether the Pre-Terminated Fiber Cable is A Better Choice?
No Commentsby www.fiber-mart.com While installing fiber optic cables, you will come across such questions. Should I choose to field terminate fiber optic cables or just turn to pre-terminated fiber optic cables? Which choice is better for the installation? Before jumping to a decision, you need to take a few things into consideration. [ Continue reading…]
Corning ClearCurve OM2 50/125/250µm Multimode Fiber
No CommentsFM SKU#:SKU00776E2Model#:ClearCurveOM2MFG PART#:Corning® ClearCurve® ultra-bendable laser–optimized™ multimode optical fiber delivers the best macro-bending performance in the industry while maintaining compatibility with current optical fibers, equipment, practices and procedures. ClearCurve OM2, OM3 and OM4 multimode fiber is designed to withstand tight bends and challenging cabling routes with substantially less signal loss [ Continue reading…]
120G CXP to 3x 40G QSFP+ Active Optical Cable
No Comments120GBASE CXP to 3x 40G QSFP+ Breakout Active Optical Cable 120G CXP to 3x 40G QSFP+ Breakout Active Optical Cable provide 120Gb systems the ability to connect to 40Gb switches or adapter cards. It provides connectivity between devices using CXP port on one end and 40G QSFP+ on the other [ Continue reading…]
40GBASE QSFP+ to 4 SFP+ Breakout Active Optical Cable
No CommentsFM SKU#:SKU10028ZModel#:Q4S-AOC-10MFG PART#: Q4S-AOC-10 40GBASE QSFP to 4x SFP+ Breakout Active Optical Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter Active Optical cable between an available QSFP port on [ Continue reading…]