An introduction to fiber cable pushing machines
No Commentsby www.fiber-mart.com Since they were first introduced in the 1980s, optical fiber cables have dramatically shrunk in size. A 96 fiber cable can now weigh 30kg/km (down from 300kg/km) and have a diameter of 7mm, compared to 20mm for first generation cables. Similarly, 12 fiber drop cables used to [ Continue reading…]
24 Channel Video to Fiber SM 20km Optical Video Multiplexer
No CommentsFM SKU#:SKU70061CModel#:FM-24V-SM-20MFG PART#: 24 Channel Video to Fiber Optical Video Multiplexer Transmitter and Receiver SM 20km Descriptions Model: FM-24V-SM-20KM Transmitter + Receiver Fiber Mode: Single-Mode Wavelengths: 1310nm/1550nm Optical Power Budget: 12dB Maximum Transmission Distance: 20km Fiber Optic Video Transmitter & Receiver transmission 24-Channel digital composite video Standalone- (Insert card version [ Continue reading…]
16E1 1+1 Fiber Back up Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack
No CommentsFM SKU#:SKU00063HModel#:PDH-16E1-2-19MFG PART#: 16E1 1+1 Fiber Back up Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack 1+1 series fiber optical MUX is point-to-point optical transmission equipment developed based on ultra large scale integrated circuit. Have perfect alarm, high reliability and stabilization, low power consumption, high integration, easy installation [ Continue reading…]
1 Channel Video to Fiber SM 20km Optical Video Multiplexer
No CommentsFM SKU#:SKU70001CModel#:FM-1V-SM-20MFG PART#: 1 Channel Video to Fiber Optical Video Multiplexer Transmitter and Receiver SM 20km Descriptions Model: FM-1V-SM-20KM Transmitter + Receiver Fiber Mode: Single-Mode Wavelengths: 1310nm/1550nm Optical Power Budget: 12dB Maximum Transmission Distance: 20km Fiber Optic Video Transmitter & Receiver transmission 1-Channel digital composite video Standalone- (Insert card version [ Continue reading…]
Wave Division Multiplexing: Why it’s Good for Fiber
No Commentsby www.fiber-mart.com A single optical fiber can carry a huge amount of bandwidth using Time-Division Multiplexing (TDM) and Coarse Wavelength Division Multiplexing (CWDM), which may be combined. TDM was developed for digital telephony to send independent signals over a single fiber using synchronized switches at each end so that [ Continue reading…]
Something About WDM Transponder?
No Commentsby www.fiber-mart.com In optical fiber communications, a WDM transponder is a common element that sends and receives the optical signal from a fiber. Maybe you have seen and used it many times. But do you really know it clearly? How much do you know? Today, this article is going to talk about [ Continue reading…]
How Multiplexing Techniques Deliver Higher Speeds on Fiber Optic Cabling
No Commentsby www.fiber-mart.com The Different Multiplexing Techniques: Different multiplexing techniques are enabling the evolution of network speeds on fiber optic cabling. Time Division Multiplexing is simply a way of transmitting more data by using smaller and smaller increments of time, and multiplexing lower data rate signals into a higher speed composite signal. [ Continue reading…]
100G QSFP28 Direct Attach Copper Cable
No Comments100G QSFP28 to 4x25G SFP28 DAC Cable (1-meter, passive, QSFP28 to SFP28, 30AWG) Product Details Part Number QSFP28-4SFP28-DAC Vendor Name Fiber-MART Connector Type QSFP28 to SFP28 Max Data Rate 100Gbps Cable Type Passive Copper Cable Wire AWG 30AWG Cable Length 1m(3.28ft) Jacket Material PVC(OFNR) Temperature 0 to 70C (32 to [ Continue reading…]
100/155Mbps OC-3/STM-1 1310nm 15km SFP Transceiver
No CommentsFM SKU#:SKU10002MYModel#:OSFP-1M31-15MFG PART#: OSFP-1M31-15 OC-3/STM-1 is a network line with transmission speeds of up to 155.52 Mbit/s (payload: 148.608 Mbit/s; overhead: 6.912 Mbit/s, including path overhead) using fiber optics. Depending on the system OC-3 is also known as STS-3 (electrical level) and STM-1 (SDH). These modules are also used for [ Continue reading…]
Application of Fiber Transceiver in Fiber-optic communication
No Commentsby www.fiber-mart.com Data transmission distance primarily governs the choice of fiber optic transceiver type and optical fiber. When working with distances up to 2 km, use multimode optical-fiber cable. Singlemode optical-fiber cable, however, is more bandwidth-intensive and has less potential for modal dispersion and noise than multimode optical-fiber cable, translating [ Continue reading…]