Optical Fiber Bandpass Filter(BPF) WDM FTTX 1550nm FM-FWDM-1550-BPF
No CommentsFM SKU#:SKU00339IModel#:FM-FWDM-1550-BPFMFG PART#: Optical Fiber Bandpass Filter(BPF) WDM FTTX 1550nm FM-FWDM-1550-BPF The optical filter is an instrument that is used for wavelength selection, which can select required wavelengths from a large number of wavelengths and reject the addition wavelengths. It can used in wavelength selection, the noise filter of the [ Continue reading…]
5 channels LGX Module Duplex DWDM OADM East-and-West
No CommentsFM SKU#:SKU00699UModel#:5DWE-LGX-FMDADMMFG PART#: Duplex DWDM OADM for East-and-West Traffic The Duplex DWDM/AD modules add (multiplex) and drop (demultiplex) selected wavelengths over dual fiber Duplex DWDM MUX & DEMUX link for East-and-West Traffic.Fiber-Mart DWDM OADM ( DWDM/AD) modules are Dense Wavelength Division Multiplexing (DWDM) Optical Add and Drop Multiplexers (OADM). “Add” [ Continue reading…]
9 channels 1RU Rack Mount Simplex CWDM OADM East-and-West
No CommentsFM SKU#:SKU00496IModel#:9SWE-1RU-FMCADMMFG PART#: Simplex CWDM OADM for East-and-West Traffic The Simplex CWDM/AD modules add (multiplex) and drop (demultiplex) selected wavelengths over single fiber Simplex CWDM MUX & DEMUX link for East-and-West Traffic.Fiber-Mart CWDM OADM ( CWDM/AD) modules are Course Wave Division Multiplexing (CWDM) Optical Add and Drop Multiplexers (OADM). “Add” [ Continue reading…]
How DWDM System Components Work Together with DWDM Technology
No Commentsby www.fiber-mart.com As DWDM system is composed of these five components, how do they work together? The following steps give out the answer (also you can see the whole structure of a fundamental DWDM system in the figure below): 1. The transponder accepts input in the form of a [ Continue reading…]
DWDM System Components
No Commentsby www.fiber-mart.com A DWDM system generally consists of five components: Optical Transmitters/Receivers, DWDM Mux/DeMux Filters, Optical Add/Drop Multiplexers (OADMs), Optical Amplifiers, Transponders (Wavelength Converters). Optical Transmitters/Receivers Transmitters are described as DWDM components since they provide the source signals which are then multiplexed. The characteristics of optical transmitters used in DWDM systems [ Continue reading…]
Introduction to DWDM Technology
No Commentsby www.fiber-mart.com DWDM technology is an extension of optical networking. DWDM devices (multiplexer, or Mux for short) combine the output from several optical transmitters for transmission across a single optical fiber. At the receiving end, another DWDM device (demultiplexer, or DeMux for short) separates the combined optical signals and passes each channel [ Continue reading…]
Duplex OM4 Multimode Armored Fiber Patch Cable
No CommentsFC-SC Duplex 10G OM4 50/125 Mulitmode Armored Fiber Patch Cable Fiber Patch Cables also known as fiber jumpers or fiber patch cords.Fiber optic patch cable is one of most commonly used components in fiber optic network.10G fiber optic patch cables provide 10 gigabit data transfer speeds in high bandwidth applications [ Continue reading…]
E2000/UPC-E2000/UPC Plenum(OFNP) Simplex 9/125 Single-mode Fiber Patch Cable
No CommentsE2000/UPC-E2000/UPC Plenum(OFNP) Simplex 9/125 Single-mode Fiber Patch Cable Plenum-rated fiber optic cables are different from other types of cabling by the special types of plastics used in the fiber optic cable jackets. Because plenum cables are routed through air circulation spaces, which contain very few fire barriers, they need to [ Continue reading…]
FC/APC to E2000/APC Plenum(OFNP) Duplex 9/125 Single-mode Fiber Patch Cable
No CommentsFM SKU#:SKU00075RModel#:SM-FCA-E2000A-PDX-FMMFG PART#: FC/APC-E2000/APC Plenum(OFNP) Duplex 9/125 Single-mode Fiber Patch Cable Plenum-rated fiber optic cables are different from other types of cabling by the special types of plastics used in the fiber optic cable jackets. Because plenum cables are routed through air circulation spaces, which contain very few fire barriers, [ Continue reading…]
7 Advantages of Fiber Optic Cables Over Copper Cables
No Commentsby www.fiber-mart.com When you’re planning a new network cable installation or considering upgrades to an existing network, you might want to consider using fiber optic cables. Network fiber cables have some definite advantages over copper cables. 1. Greater Bandwidth Copper cables were originally designed for voice transmission and have a [ Continue reading…]