How to choose a management type and non-management type optical fiber transceiver?
No CommentsWell-known, optical fiber output device can be used for continuous optical fiber, and for the purpose of long-distance import. Managed type, unmanaged type, optical fiber output device, two types, common type, but what kind of choice is it? Is it a separate ward? A managed optical fiber projector? Management [ Continue reading…]
How do you use and Maintenance the optical fiber?
No CommentsOptical fiber jump line, optical communication area, equipment, connection, delivery, and optical fiber import. Causes, understanding Necessary usage And precautions cannot be taken or a step forward, and the amount of optical fiber imported and the amount of optical fiber used. Main text General optical fiber connection, disconnection method and [ Continue reading…]
How to distinguish the quality of MTP/MPO cable?
No CommentsGenerally, if you want to buy high-quality MTP/MPO fiber optic patch cords, you need to consider many factors, such as fiber core brand, connector, insertion loss, etc. The following is a list of five characteristics that high-quality MTP/MPO wires should have. 1. Branded Fiber Optic Core MTP/MPO fiber [ Continue reading…]
What kind of department is the 10G home optical fiber network?
No CommentsInevitable demands for corporate networks, home networks, rapid and feasible Ethernet. Arrival 10G or more Internet technology In-commerce regional maturity and widespread use, 10G network department Narimoto already large drop, positive cause, partial household start-up consideration, pre-existing 1G optical fiber home network, but ， 10G optical fiber network. Main text [ Continue reading…]
Tell You the Best Way to Clean Fiber Optic Connectors?
No CommentsWhat are the Differences between a Hand Held Microscope and a Video Microscope? A digital microscope is just a regular hand held microscope with a camera added to it. Usual magnification ranges from 100x to 800x, a popular magnification is 400x, although 200x can usually do the job. Sometimes [ Continue reading…]
Brief introduction of Armored vs. Non-Armored Fiber Optic Cable
No CommentsFiber optic cable is offered with two different types of armor – aluminum interlocking armor for indoor cables and corrugated steel tape for outdoor cables. The armoring offers an added layer of mechanical protection to the cable. The differences between the two types of armor are the material that the [ Continue reading…]
Whether is worth to Use EDFA Amplifier in Long WDM System?
No CommentsIntroduction to EDFA Amplifier EDFA amplifier, also referred to as erbium-doped fiber amplifier, is basically composed of a length of Erbium-doped fiber (EDF), a pump laser, and a WDM combiner. When it works, the pump laser with 980 nm or 1480 nm and the input signal around 1550 nm [ Continue reading…]
Three different types of QSFP28 Optical Transceiver
No CommentsThe appearance of the QSFP28 optical transceiver is the same as that of the 40G QSFP + optical transceiver. The difference is that QSFP28 optical transceiver can transmit optical signals up to 100G. Therefore, QSFP28 optical transceiver has become the mainstream 100G optical transceiver and the preferred solution for [ Continue reading…]
Do you know The difference between CWDM transceiver and DWDM transceiver?
No CommentsDWDM technology multiplexes the tight spectral spacing of a single optical fiber carrier in a given fiber to take advantage of the transmission performance that can be achieved. DWDM wavelength spacing is very tight, because the closer the spacing is, the more channels per fiber will be reused, and thus [ Continue reading…]
What areas does CWDM SFP apply to?
No CommentsSFP stands for “small form-factor pluggable.” SFP transceivers are compact and hot-pluggable devices that act as an interface between networking equipment (switch, router, network card) and interconnecting cabling (copper or fiber). The CWDM optical module is an optical module using CWDM technology to implement the connection between the existing [ Continue reading…]