why and when to use a PM polarizer?
No CommentsPolarizing filters are a magical thing! With the advent of digital photography and computerized post-processing, software is now able to recreate many of the effects that creative filters were used for in the past. However, polarizers are one of the few types of filters whose effects cannot be recreated in [ Continue reading…]
Fiber Connector Introduction
No CommentsThe optical fiber connector is a device for detachable (movable) connection between an optical fiber and an optical fiber. It precisely connects the two end faces of the optical fiber so that the light energy output by the transmitting fiber can be coupled to the receiving fiber to the maximum [ Continue reading…]
PM Coupler for Giving Innovative Space to the Inventors
No CommentsCreativity is not a thing which has certain graphs or moves to develop, it can be considered as anything which is new and innovative, that’s why our technology has also certain thing which gives the right to be creative in any sense, because sometimes weird things make the best [ Continue reading…]
What’s the Need for Installing CWDM Mux/Demux
No CommentsAn abbreviated form of Coarse Wavelength Division Multiplexing, CWDM technology is a great way of creating a flexible “pay-as-you-grow” type of high capacity optical network. This technology is widely used in dual fiber applications. Once you get CWDM Mux/Demux module installed in your network, you can benefit from the added [ Continue reading…]
Do you know the difference between OFNR and OFNP
No CommentsThe cable jacket comprised with different materials based on different applications, In the United States, plastics used in the construction of plenum cable are regulated under the National Fire Protection Association standard NFPA 90A: Standard for the Installation of Air Conditioning and Ventilating Systems. All materials intended for use [ Continue reading…]
How to Choose MTP/MPO Cable for 10G/40G/100G Connections?
No CommentsAs the data center expands, the traditional fiber optic cables can hardly meet the high requirements for networking, as they not only occupy a large room, but also make it more difficult to manage cables. In contrast, MTP cable and MPO cable provide a multi-fiber connectivity in one connector to support higher [ Continue reading…]
Brief Introduction to Polarization Maintaining Isolators
No CommentsPolarization maintaining isolator which ‘at times’ is also called fiber optic isolator and polarization maintaining optical isolator. It allows and keeps light to travel in one direction only. Its prime job is to prevent back reflection and backscattering in the reverse direction, for all states of polarization. In technical [ Continue reading…]
Why should Use the Right Polarization Maintaining Fiber
No CommentsFused Coupler is a type of optical fiber that is used to split high power single line polarized light into multiple directions without disturbing the line at the state of polarization. This fiber is also used as a power tap to monitor signal power in a PM fiber system. A [ Continue reading…]
Tips for Fusion Fiber Splicing
No CommentsWhether you need to extend the reach of fiber or repair a severed cable in the field, fiber splicing is a critical skill for any field tech. Here are a few useful tips to ensure your splices are done safely and effectively. NOTE: There are two methods of fiber [ Continue reading…]
The Role of Optical Fiber Splicing Machine
No CommentsFiber optics was a turning point in the field of telecommunication. It marked the era of new heights in the field of communication. With fiber optic cables being a ground-breaking innovation, the fusion splicing machine became the next improvement which improved networking and industrial communication to a great extent. The [ Continue reading…]