Some Notes Of Buying Fiber Pigtails
No Commentsby www.fiber-mart.com In any fiber optic cable installation, the way the cables are attached to the system–is vital to the success of the telecommunications network. If done well, the connection allows optical signals to pass with low attenuation and little return loss. One of the proven ways to join optical [ Continue reading…]
Do you know Fiber Optical Transponders?
No Commentsby www.fiber-mart.com What is Fiber Optical Transponder? As we know, transponder is important in optical fiber communications, it is the element that sends and receives the optical signal from a fiber. A transponder is typically characterized by its data and the maximum distance the signal can travel. Functions of [ Continue reading…]
What is The Fiber Identifier?
No Commentsby www.fiber-mart.com The Fiber Identifier acts as the fiber optic installer or technician’s infrared eyes. By placing a slight macrobend in an optical fiber or fiber-optic cable, it can detect infrared light traveling through the optical fiber and determine the direction of light travel. Some fiber identifiers can also detect test pulses [ Continue reading…]
Cisco 1.25Gbps CWDM SFP 60km Compatible Transceiver
No CommentsFM SKU#:SKU00001I2Model#:CWDM-SFP1G-60MFG PART#: CWDM-SFP1G-60 The CWDM-SFP1G-60 series single mode transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability.This module is designed for single mode [ Continue reading…]
Cisco 1.25Gbps CWDM SFP 120km Compatible Transceiver
No CommentsCWDM-SFP1G-120 The CWDM-SFP1G-120 series single mode transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability.This module is designed for single mode fiber and operates [ Continue reading…]
Special Instructions of Cisco SFP Transceivers
No Commentsy www.fiber-mart.com The Cisco SFP transceivers are designed to change the serial electric signals to the serial optical signals which mainly maintain gigabit Ethernet, includes fiber channel and SONET/SDH, it provides a beneficial way, adopt the method of resolution in the university campus, data center, metropolitan areas, ring networks and store web [ Continue reading…]
What is Defined by the SFP MSA or SFP+ MSA?
No Commentsby www.fiber-mart.com The main elements defined in the SFP/SFP+ MSA is listed as follows: Mechanical Interface Mechanical dimensions of the device (H: 8.5mm, W: 13.4mm, D: 56.5mm) Transceiver edge connector to host PCB-mounted electrical connector mating Host board mechanical layout (location/size of solder pads, etc.) Insertion, Extraction and [ Continue reading…]
The Solution to SFP Transceiver Module Connections
No Commentsby www.fiber-mart.com Recently I met a trouble that when I want interconnect WS c2960 24 TC L + 2 SFP with 1000base LH GLC LH SMD or GLC LH SM to WS C3750G 12S + 12 SFP ports, and I do not know which model of GLC LH SMD or [ Continue reading…]
PON Splitters—An Important Role in FTTH Networks
No Commentsby www.fiber-mart.com Created by the Full Service Access Network (fiber-mart.com) working group, the Passive Optical Network (PON) is a group of technologies that put Fiber to the Home (FTTH) into reality. It consists of a central office node optical line terminal (OLT) at the service provider’s office and a number [ Continue reading…]
Differences Between FBT Splitter and PLC Splitter
No Commentsby www.fiber-mart.com Nowadays, with the further popularization of the optical fiber communication, fiber optic splitter plays an increasing significant role in many of today’s optical network topologies. Although there are variations of splitter types, the two most commonly deployed splitters are FBT (Fused Biconical Taper) splitter and PLC (Planar Lightwave [ Continue reading…]