12 Fibers 10G OM4 12 Strands MTP Harness Cable 3.0mm LSZH/Riser
FM SKU#:SKU0077A2
Model#:FM12OM4-2MTPX-x
MFG PART#:
Model#:FM12OM4-2MTPX-x
MFG PART#:
12 Fibers, MTP to LC/SC/ST/FC,10G OM4, 12 Standard – MTP Breakout Harness Cable
MTP is the high dense degree of optical fiber pre-connect system,which is generally use in three areas:
- The data centra application with high dense degree environment
- The optical fiber to the building
- The internal connector application in fiber equipment such as Splitter, 40G /100G SFP and SFP+.
Fiber-Mart’s MTP fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard. It can be widely used for
10G upgrade to 40G/100G data center.MTP Connector
 |
 |
| MTP Male with Pins | MTP Female without Pins |
| Two other clearly visible features are the noses and guide grooves (keys) on the top side. The Female and Male need to be used together. |
Pre-terminated MTP Technology-Polarity Type B (Cross)
The application above is for the MTP-LC harness cable connecting a QSFP+ port to (4)SFP+ ports directly.
In many existing DC environments, LC-MTP cables are used to support high density fiber trunks between switches, rack patch panels and main distribution cabling panels (MDA).
For example:
The above is the Eight-Fiber MTP-LC Assembly uses a pinless connector on one end for interfacing with the QSFP port on the Cisco Nexus 6000series, The other end contains four LC uniboot connectors, which provide connectivity to the SFP+ ports on the switch. The polarity of the assembly pairs the fibers from the MTP Connector from the outside to the inside; thus, fiber 1 and fiber 12 are a duplex pair, as are fiber 2 and fiber 11, etc.
MTP&MPO Difference
The term MTP is a registered trademark of US Conec, which have became the tendency in Europe&American fiber communications areas at present.
 |
 |
Assembly Structure Illustration
12-Fiber Mini-Core Cable structureMTP Hybrid Harnesses Fiber Patch Cables are terminated with MTP connector on one end and other end with LC, FC, SC, ST, or MTRJ connectors to meet a variety of fiber cabling requirements.
1.The default diameter of the MTP cable is 3.0mm.
2.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us at sales@fiber-mart.com for other diameter standard.
3.Fiber-Mart can also custom the pulling eyes, welcome to contact us if you need.
MTP/MPO Machinery & Testing Equipment
| 1 | Our adopt industry’s leading high-performance polishing machine, and complemented by precision plates holders designed for MT ferrules. |
| 2 | The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process, the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. |
| 3 | After the 3D interference detection, the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. |
MTP Termination
| Type | Single mode | Single mode | Multi mode | |||
| (APC polish) | (PC polish) | (PC polish) | ||||
| Fiber count | 8, 12, 24 etc. | 8, 12, 24 etc. | 8, 12, 24 etc. | |||
| Fiber type | G652D, G657A1 etc. | G652D, G657A1 etc. | OM1, OM2, OM3 etc. | |||
| Maximum Insertion Loss | Elite | Standard | Elite | Standard | Elite | Standard |
| Low Loss | Low Loss | Low Loss | ||||
| ≤0.35 dB | ≤0.70 dB | ≤0.35 dB | ≤0.70 dB | ≤0.35dB | ≤0.60dB | |
| Return Loss | ≥60 dB | ≥60 dB | N/A | |||
| Durability | ≥500 times | ≥500 times | ≥500 times | |||
| Operating Temperature | -40℃ ~ +80℃ | -40℃~ +80℃ | -40℃~ +80℃ | |||
| Test Wavelength | 1310nm | 1310nm | 850nm |
Common Termination
| Type | Single mode | Multi mode | |
| (UPC APC polish) | (UPC polish) | ||
| Insertion Loss | ≤0.30dB | ≤0.30dB | |
| Return Loss | ≥55 dB | ≥60 dB | ≥25 dB |
| Durability | ≥1000 times | ≥1000 times | |
| Operating Temperature | -40℃ ~ +80℃ | -40℃ ~ +80℃ | |
| Test Wavelength | 1310nm | 850nm |
Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
Make To Order
| Fiber Type | Fiber Standard | Fiber Count | Cable Type | Termination | Cable Length(m) | Breakout Length 1&2(Inches) | Breakout Termination | Polish Type |
| OM4 OM3 OS1/2 OM2 OM1 |
12 Fibers | 8~144 Fibers | LSZH Bunch LSZH Ribbon Riser Bunch Riser Ribbon |
First Connector: MTP Female MTP Male |
1~999 | 12~99 (36″ is typical) |
3.0mm | UPC APC |
| 24 Fibers | 24~144 Fibers | Second Connector: LC Duplex/LC Simplex SC Duplex/SC Simplex ST Duplex/ST Simplex FC Duplex/FC Simplex |
0.9μm (standard) 2.0mm 3.0mm |
Note:Polishing connector (A): PC (multimode), APC 8° (single-mode)
Polishing connector (B) : PC (multimode/single-mode), APC 8° (single-mode)
Furcation length (B): 0.5m/0.3m for 1m total length
Type of protection connector: IP20
Patch cord Type: Minicore cable, round
Polishing connector (B) : PC (multimode/single-mode), APC 8° (single-mode)
Furcation length (B): 0.5m/0.3m for 1m total length
Type of protection connector: IP20
Patch cord Type: Minicore cable, round
About the Author