40G QSFP+ Optical Modules


by Fiber-MART.COM
As we know, fiber optical transceiver is an electronic device that receives an electrical signal, converts it into a light signal, and launches the signal into a fiber. It also receives the light signal, from another transceiver, and converts it into an electrical signal. Optical transceivers are becoming smaller, but more powerful, which makes them an important piece in server technology. It is the key component in fiber optic transmission. The basic interface of 40G QSFP+ transceiver modules are 40GBASE-LR4 and 40GBASE-SR4 in QSFP+ form factor.
 
40G QSFP+ Transceiver
40GBASE-LR4 QSFP+: 40GBASE-LR4 transceiver support with a link length up to 10 kilometers over 1310 nm single mode fiber, LC Connector. It is most commonly deployed between data-center or IXP sites with single mode fiber.
 
40GBASE-SR4 QSFP+: 40GBASE-SR4 transceivers are used in data centers to interconnect two Ethernet switches with 8 fiber parallel multimode fiber OM3/OM4 cables. It can support the transmission distance up to 100 m with OM3 fiber and 150 m with OM4 fiber. The optical interface of 40GBASE-SR4 QSFP+ is MPO/MTP.
 
40GBASE-LR4 PSM QSFP+: 40G LR4 Parallel Single Mode (PSM) transceivers which are used to provide support for up to four 10Gbps Ethernet connections on a QSFP+ port over single mode fiber at distances up to 10 km.
 
40GBASE Extended SR4 QSFP+: Designed with optimized VCSEL with better performance of RMS spectral width compared with QSFP+ SR4. QSFP+ extended SR4 transceivers can support transmission distance up to 300 m with OM3 fiber and 400 m with OM4.

Suggested Similar Articles

About the Author

Leave a Reply

Your email address will not be published. Required fields are marked *